2020-08-18

Milwaukee’s New M18 FUEL™ Mid-Torque Impact Wrenches Can Tackle Over 90% of Fastening Applications!

MILWAUKEE, WI- Milwaukee Tool unveils the most versatile impact wrenches in the industry with the next generation of their M18 FUEL™ Mid-Torque Impact Wrenches. Packing up to 650 ft-lbs of nut-busting torque while weighing in at only 5.1 lbs, these new impacts offer the best power-to-weight ratio in their class for the most access in tight spaces and faster bolt removal.

“In 2017 we launched mid-torque impact wrenches, solutions that bridged the size and power gap between small compact impact wrenches and extremely powerful high torque impact wrenches. Now we’re delivering the next generation of these mid-torque impact wrenches, significantly decreasing the length while increasing the torque!” said Eric Rusch, Group Product Manager for Milwaukee Tool. “What will surprise most users about these new M18 FUEL™ Mid-Torque Impact Wrenches is their ability to tackle more than 90% of the daily applications – making this their go-to solution and allowing them to only reach for their high torque impacts when absolutely necessary.”

While up to 3lbs lighter than other high torque impact wrenches, these mid-torque impact wrenches are equipped with a POWERSTATE™ Brushless motor that generates the torque and speed needed to perform many of the same tasks, such as removing large bolts or lug nuts.  Additionally, as the most compact tools in their class, they can easily access stubborn fasteners in spaces where larger impact wrenches can’t fit.  REDLINK PLUS™ Intelligence ensures maximum performance and protects the tools against overloads, overheating, and over-discharge. The M18™ REDLITHIUM™ Battery Pack ensures these tools provide more work per charge and more work over the life of the pack.

The four-mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4 when the tool is in forward, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. When the tool is in reverse, Mode 4 delivers Bolt Removal control, which delivers full torque output and then decreases RPMs once the bolt is loosened to prevent fastener drops.

For increased visibility in confined and low-light workspaces, these tools are also designed with tri-LEDs that deliver brighter light with less shadows.

Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. The new M18 FUEL™ Mid-Torque Impact Wrenches are fully compatible with the entire M18™ line, now offering more than 200 power tool products.

*M18 FUEL™ is engineered for the most demanding tradesmen in the world. Delivering unrivaled performance, all M18 FUEL™ products feature three Milwaukee®-exclusive innovations—The POWERSTATE™ Brushless Motor, REDLITHIUM™ Battery Pack and REDLINK PLUS™ Intelligence Hardware and Software—that deliver unmatched power, run-time and durability on the jobsite. Simply put, M18 FUEL™ tools are the most powerful 18V cordless tools in their class.

Specifications

M18 FUEL™ Mid-Torque Impact Wrench w/ 3/8” Friction Ring (2960-22) – replacing 2852

Nut-Busting Torque: 600 ft-lbs

Fastening Torque: 550 ft-lbs

RPM: 0-2,575 RPM

IPM: 0-3,100 IPM

4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)

Tool Length: 6”

Tool Weight (w/ battery): 5 lbs

 

Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ 3/8” Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.

Also available as a Bare Tool (2960-20) or with REDLITHIUM™ 2.0 Compact Batteries (2960-22CT)

 

M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Friction Ring (2962-22) – replacing 2861

Nut-Busting Torque: 650 ft-lbs

Fastening Torque: 550 ft-lbs

RPM: 0-2,575 RPM

IPM: 0-3,100 IPM

4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)

Tool Length: 6”

Tool Weight (w/ battery): 5.1 lbs

 

Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Friction Ring, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.

Also available as a Bare Tool (2962-20)

 

M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Pin Detent (2962P-22) – replacing 2860

Nut-Busting Torque: 650 ft-lbs

Fastening Torque: 550 ft-lbs

RPM: 0-2,575 RPM

IPM: 0-3,100 IPM

4-Mode DRIVE CONTROL™ (includes Auto Shut-Off Mode and Bolt-Removal Mode)

Tool Length: 6”

Tool Weight (w/ battery): 5.1 lbs

 

Kit Includes: M18 FUEL™ Mid-Torque Impact Wrench w/ ½” Pin Detent, (2) M18™ REDLITHIUM XC5.0™ Battery Packs, M12/M18 Charger, and Contractor Bag.

Also available as a Bare Tool (2962P-20)

 

Also Available:

M18 FUEL™ Mid-Torque Impact Wrench Protective Boot (49-16-2960)

  • Fits the following M18 FUEL™ Mid-Torque Impact Wrenches: 2960, 2962, 2962P

M18 FUEL™ Mid-Torque Impact Wrench Lanyard Loop (49-16-2962)

 

 

About Milwaukee Tool

Milwaukee Tool, founded in 1924, is a global leader in delivering innovative solutions to the professional construction trades that offer increased productivity and unmatched durability. Whether it is through their world-leading M12™, M18™, and MX FUEL™ cordless systems, the ground-breaking performance of their M12 and M18 FUEL™ products, jobsite lighting, time-saving accessories, or innovative hand tool and storage products, Milwaukee® is dedicated to delivering a steady stream of advanced, trade-specific solutions. Milwaukee Tool is a Brookfield, Wisconsin-based subsidiary of Techtronic Industries Co. Ltd. (TTI) (HKEx stock code: 669, ADR symbol: TTNDY). For more information on the full line of Milwaukee® products, please call 1-800-SAWDUST or visit www.milwaukeetool.com.